BS-K Air Inflation Flotation Machine,BS-K Flotation Cell-Flotation Machine

Flotation Machine,Flotation Cell,Froth Flotation Process,Xinhai welcome your arrival!

BS-K Air Inflation Flotation Machine

BS-K Air Inflation Flotation Machine

Advantages

1、Low power consumption
2、The air is good, the air bubbles are dispersed evenly, and the foam is stable.
3、High flotation index
4、Wearing parts wear resistance, long life

Work Principle

When flotation machine work, with the rotation of the impeller, from the surrounding slurry tank bottom to breathe through the lower end of the impeller between the impeller blades, simultaneously, by the blower to the air distributor and the low-pressure air through the hollow shaft impeller chamber, also enter. Pulp mixed with air in between the blades, the impeller from the top half of the surrounding syncline launched by the rear of the stator steady flow and directional access to the entire tank. Foam bubbles rise to the stable region, through the enrichment process, the foam from the artesian overflow weir into the foam tank. Also part of the pulp flow to the lower part of the impeller, and then by an impeller stirring, remixed formation of mineralized bubbles, the remaining pulp flows to the next trough until eventually become tailings.

Product Features

Power consumption is very small, energy saving 30-50%

The air is good, the air bubbles are dispersed evenly, and the foam is stable.

Solid particles can be fully suspended, not easy to sink trough, mixed with good slurry gas, flotation index is high

Wearing parts wear resistance, long life

The main shaft is hung on the frame, the structure is compact, and the installation is convenient.

U-shaped tank, less tailings deposition

The diameter of the impeller is small, the circumference speed is low, the power consumption is small.

Mechanical stirring, not self suction, not self suction pulp, operating between ladder configuration (gap 300-400mm).

Product Application

BS-K Air Inflation Flotation Cell can be widely used in non-ferrous metals, ferrous metals, and non-metallic mineral selection, suitable for large and medium sized flotation plant of the rough selection and scavenging operations.

Technical Parameters

Model Volume of tank
(m3)
Internal dimensions
(mm)
Rotor speed
(r/min)
Amount of treatment
(m3/min)
Motor Air pressure
(MPa)
Model Power (kw)
BS-K2.8 2.8 1550 × 1550 × 1350 248 0.4~3 Y 160M2 -8 5.5 0.015
BS-K4 4 1850 × 1850 × 1550 210 0.5~4 Y 160L -8 7.5
BS-K8 8 2350 × 2350 × 1950 180 1.0~8.0 Y 180L -6 15

Related Product: